The Infiniti QX80 is equipped with a 360 camera located below the stock emblem. However, there is no camera hole in the LED emblem. To install it, you will need to cut the green part of the LED emblem. There is no circuit board within the green part, so cutting it will not affect the functionality of your 360 camera.
We understand that not all customers may accept this modification, so we are providing these details here. If you can accept this, you can place the order. If you cannot accept it, please contact us for a refund.
About How to Install the Infiniti QX80 LED Emblem:
There are two wires that need to be connected:
- Red Wire: Connect to the daytime running light wire (+) or to the fuse box.
- Black Wire: Connect to the grounding.
The installation method is the same as that of a normal LED emblem.
conclusion
In conclusion, when installing the Infiniti QX80 LED emblem, it is essential to note that the modification requires a DIY approach. Specifically, you will need to cut the green part of the LED emblem to accommodate the 360 camera located below the stock emblem. Connecting the red wire for the daytime running light and the black wire for grounding follows typical installation procedures for LED emblems. By understanding these installation requirements, you can ensure a successful upgrade to your Infiniti QX80, enhancing both its appearance and functionality. If you have any questions or need assistance, please feel free to reach out.
Leave A Comment