Before installing the ID4 Illuminate Emblem And Led Stripe, please check the video. Our ID4 Illuminate Emblem And Led Stripe are OEM, which means you can replace and install them directly, with no need to break any wires.

How To Install OEM ID4 Illuminate Emblem And Led Stripe

  1. Remove the OEM OEM ID4 Emblem And Stripe. (Please remove it from the back, it will not break the OEM logo)
  2. Replace and install our OEM ID4 Illuminate Emblem And Led Stripe.
  3. No matter you buy one led emblem or 1 set led stripe, it is used the same connection wire, two longer wires connect the led stripe, and the short wire connects the emblem.
  4. The black wire connects the grounding. (Check the video 01:33 at the following video)
  5. The next work is through the wiring harness to the cab.
  6. Remove the three clips and remove the cover.
  7. If you want to light up with a headlight, you need to connect BCM Computer.
  8. How to find the BCM Computer plug？ The third innermost plug. Pull out the plug to find the A61 port, connect a blue and Brown cord and put these 2 into the plug of A61, plug it back into place.
  9. Now It’s Done.

This is the OEM ID4 Illuminate Emblem And Led Stripe instruction, no need to break any wire.

How To Install OEM ID4 Illuminate Emblem And Led Stripe

 

Where to buy the OEM ID4 Illuminate Emblem And Led Stripe

You can check via this link. We have lots of dynamic led emblems, this one is OEM. You can check the label on the emblem and stripe.